Educational Posts

4 Things You Need To Do Before Upgrading to Gigabit Internet

A lot of cities now are finally experiencing the long-awaited gigabit internet speed. It is a fiber infrastructure that aims to improve and provide super-fast connection services. Despite the gigabit existence, are your devices ready to upgrade to this innovative internet experience?

Although there are several ways to improve existing internet speeds, such as router setup, gigabit internet services is definitely worth the hype. To fully enjoy the ultimate connection, make sure your devices are gigabit-ready.

If you’re ready, then follow these 4 steps to get started with your upgraded gigabit experience.

Have a Proper Wire Connection Setup

To maximize your gigabit speed experience, having wired connections are the most ideal setup. Why? Because they are reliable and they have less to zero interference. For you to experience the ultimate gigabit internet speed, make sure you have the appropriate wired connections. It is important to filter out all cable connections to your router from your modem.

On the brighter side, most newly manufactured Ethernet ports in the past years are in the gigabit range. However, if your router or other devices are too old and are still using the older Ethernet type, it won’t support the new and faster gigabit connection.

It is definitely worth to take a closer look at the types of Ethernet cables. As much as possible, they should be under category Cat 5e or higher in order to support gigabit speeds. Being said that, OTS ethernet cable provides the best Ethernet cable types that are gigabit-speed compatible.

Ensure That Your Devices Support the Newest Wifi Standards

Check and see what wifi standards your devices support if you’re not using a wired connection. The standard wifi compatibility scale is 802.11ac, but it will extend to 802.11ax (relabeled as Wifi 6) by the time 2019 ends. It is ideal to buy a router model that supports the latest wifi label to be future-ready, in case you’ll buy a new router that lasts for years.

If you’re laptop or computer does not support Wifi scale 802.11ac — see your network settings — you can upgrade using an adapter. Nonetheless, with the presence of Wifi 6, it is best to invest in new devices. However, not all people can afford adapters since they are quite expensive and complicated to assemble, so it isn’t ideal.

At length, put into consideration that adapter solutions aren’t that feasible with mobile devices, they must be 802.11ac compatible to function properly with gigabit connection speeds.

Image source:

Set up Your 5GHz-Band Router

A lot of routers available in the market now are dual-band — they support the standard 2.4GHz and 5GHz band. Among these two bands, 5GHz has the biggest potential in all aspects. The range may not be that much compared to the original band, however, it contains less wireless chatter. It clearly shows that the 5GHz band provides a better and clearer signal, and supports gigabit speed levels.

Moreover, the majority of dual-band routers will ask users to create a name for its 5GHZ channel upon setup. Therefore, check if you have created one already and always remember to use it. Setting up the channel back to default may result in poor performance of your connected devices.

You need to replace your router if it’s not dual-band. Latest routers are mostly dual-band, and a lot have built-in software that can easily shift from one band to another to obtain the best possible connection. Also, single-band routers will unlikely support the 802.11ac label.

Take note that using a 5GHz band provides a clearer network connection, especially in busy and dynamic areas, despite its shorter transmission range. Hence, devices should not be far from the router.

Update Your Firmware and OS

Regardless if everything is fully set up, you’re not completely done. You still need to check if the firmware update is on the latest version. This is important for everything to run smoothly. Checking of firmware and operating system updates can be done through your router administrator page. If you’re not sure how to do it, you may ask assistance from your internet provider.

After the router settings have been properly configured, follow the instructions from the manufacturer on how to upgrade your device. Enabling updates automatically will help with this step. Hence, no need to do the upgrade manually. It’s also ideal to update other devices, especially for automatic updates that were turned off. A lot of OS updates include quality changes that enhance efficiency and functionality.

Image source:


Gigabit Ethernet will surely bring internet user experience to a whole new level. However, in order to experience faster speeds, certain measures need to be considered. Devices must be updated for compatibility. If everything is properly set up, don’t forget to check for a firmware update. You can always contact your internet provider or manufacturer for further assistance.


About the author

RMG Staff

Rootmygalaxy a.k.a RMG is one of the biggest Android Guide websites which has been serving for last 4 years. The site gets avg. 1.5 million views per month These Posts are done by RMG Team Members.

LineageOS 15.1 (Android 8.1 Oreo) Is now available for many devicesDownload Now

We use cookies to give you the best user experience on our website more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.