How To Enter Into Cubot R15 Bootloader/Fastboot Mode

How to Boot into Cubot R15 Bootloader/Fastboot Mode: In all the Android devices, you will find a crucial feature called the bootloader mode. Each and every device comes with both the Recovery (stock) and the bootloader mode. This mode will allow a user to perform tasks like flashing/modifying the system partitions, unlocking the bootloader, different OEM level operations, installing TWRP or other custom recoveries, and more. This part is basically the fun part where you get to tinker with the settings and give your device a brand new outlook.

The Cubot R15 is a mid-range device from the company released in Feb 2019. The device comes equipped with 6.26 inches with IPS technology and the resolution is 1080 x 2240 pixels. The smartphone is powered by MediaTek MT6580P Processor coupled with 2 GB RAM and 16 GB of internal storage with support up to 256GB via microSD. The Cubot R15 runs on Android 9.0 Pie out of the box.

The device sports an 8 MP rear dual camera setup on the back side with Dual-LED and AF. There is a 5 megapixels camera on the front. The device houses a 3000 mAh, Li-Polymer Non-Removable battery

Today, in this post, we will be sharing with you how to boot your Cubot R15 Bootloader/Fastboot mode. There are two methods using which you can boot into Cubot R15 Bootloader/Fastboot mode.

Steps To Enter Cubot R15 Bootloader/Fastboot Mode

Enter Into Cubot R15 Bootloader/Fastboot Mode

There are two ways which can help you to boot into Cubot R15 Bootloader / Fastboot Mode 1) Using Power and Volume Keys 2) fastboot commands via Computer

#1 Using Hardware Keys

Follow the given steps to boot into Cubot R15 Bootloader by hardware buttons

  • You have to Press and hold the power button for a few seconds
  • Now tap the Power Off option when the Power Menu appears
  • Now you have to Wait for the Cubot R15 to completely turn off
  • Then press and hold the Power button and the Volume Down button at the same time
  • Continue holding these two buttons down until you boot into Fastboot Mode

#2 Using PC fastboot Commands

If you want to boot Cubot R15 into bootloader mode from your PC, then follow the linked guide below

Note: Make sure you have installed your device USB drivers on your PC and You have install ADB and Fastboot Drivers On PC

  • Connect your android to your PC with USB cable
  • Now go to ADB & fastboot folder and Open the command window there(Right click on the empty space inside the folder then select “Open command window here” or “Open PowerShell Window Here” option to launch a command window
  • Now reboot into the bootloader by issuing the following commands. (Make sure your device is detected by your PC)
adb reboot bootloader

adb reboot bootloader

If you have anything related to this post, feel free to leave that in the comment section down

Dibyashree Sharma
Dibyashree Sharma
Dibyashree Sharma graduated in Computer Science from NIT Rourkela. For the past eight years, she has been blogging about Android, which she is really passionate about. She has built a good reputation as a reliable source. Away from the digital sphere, Dibyashree enjoys playing tennis, a sport she is as passionate about as she is about technology.

Leave a Comment