Enable Developer Option and USB Debugging On Redmi Note 7 Pro

This guide will help you to Enable Developer Option and USB Debugging On Redmi Note 7 Pro. As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.

In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Xiaomi Redmi Note 7 Pro by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.

The much-awaited Redmi Note 7 Pro was recently in India. The Redmi Note 7 Pro comes with a 6.30-inch touchscreen display with a resolution of 1080 pixels by 2340 pixels. The screen is protected by very trusted Corning Gorilla Glass 5 protection. The back side is also protected by Gorilla Glass 5.

The Redmi Note 7 Pro is powered by Qualcomm SDM675 Snapdragon 675 (11nm)  2.2GHz processor and it comes with 4/6GB of RAM. The phone packs 64/128 GB of internal storage that can be expanded up to 256GB via a microSD card.  The Redmi Note 7 Pro packs a 48-megapixel (f/1.8, 1.6-micron) primary camera and a 5-megapixel secondary camera on the back side. There is a 13-megapixel front camera with HDR support.

The Redmi Note 7 Pro runs Android 9.0 (Pie) at the top of Xiaomi’s MIUI 10. The device houses by a 4000mAh non-removable Li-Po battery. The device comes with Quick Charge 4. It has Bluetooth 5.0 and 2.0, Type-C 1.0. The fingerprint scanner is rear mounted and it is very fast.

Steps To Enable Developer Option and USB Debugging On Redmi Note 7 Pro

Note: The process is the same for all most all the android devices. The images shared below are from our OnePlus 6t post, but this will work on all stock android devices.

1.Developer Option

• First, open Settings on your Xiaomi Redmi Note 7 Pro
• Now scroll down to About Phone and tap on it

• Scroll down to MIUI Version and tap 5-7 times to enable developer option

2.Enable USB debugging on Xiaomi Redmi Note 7 Pro

• Once you enabled the Developer Options. Returned back to Settings > Additional Settings >Developer Options > USB Debugging. Just Enable that option.

• Done!! USB Debugging on Xiaomi Redmi Note 7 Pro is now enabled.

If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.