Basic Guides

How To Enter into Huawei Y7 Pro (2019) Bootloader/Fastboot Mode

How to Enter into Huawei Y7 Pro (2019) Bootloader/Fastboot Mode: In all the Android devices, you will find a crucial feature called the bootloader mode. Each and every device comes with both the Recovery (stock) and the bootloader mode. This mode will allow a user to perform tasks like flashing/modifying the system partitions, unlocking the bootloader, different OEM level operations, installing TWRP or other custom recoveries, and more. This part is basically the fun part where you get to tinker with the settings and give your device a brand new outlook.

Huawei Y7 Pro (2019) was released in January 2019. It is the first mid-range device from Huawei in 2019. It comes equipped with a 6.2 inches display with a water drop notch on the top. The display has a 19:9 screen ratio. The display has a resolution of 720 x 1520 Pixels (~269 ppi density). The screen protection is unknown. The device is powered by Qualcomm SDM450 Snapdragon 450 (14 nm) which is an Octa-core 1.8 GHz Cortex-A53 processor coupled with Adreno 506 GPU. It is coupled with 3 GB of RAM. It comes with 32 GB internal storage option which can be expanded up to 512 GB via microSD.

The all-new Huawei Y7 Pro (2019) sports Dual rare camera setup, the primary camera is 13 MP, f/1.8, PDAF and the secondary is 2 MP, f/2.4, depth sensor. It has a 16-megapixel front camera for a selfie. The device runs on the Android 8.1 Oreo out of the box with Huwaei’s  EMUI 8.2 custom skin at the top. It houses a Non-removable Li-Po 4000mAh battery. Honor10 includes a Fingerprint, accelerometer, gyro, proximity, compass. The Fingerprint scanner on the rear side under the camera section.

Today, in this post, we will be sharing with you how to boot your Huawei Y7 Pro (2019) Bootloader/Fastboot mode. There are two methods using which you can boot into Huawei Y7 Pro (2019) Bootloader/Fastboot mode.

Steps To Enter Huawei Y7 Pro (2019) Bootloader/Fastboot Mode

Enter into Huawei Y7 Pro (2019) Bootloader/Fastboot Mode

There are two ways which can help you to boot into Huawei Y7 Pro (2019) Bootloader / Fastboot Mode 1) Using Power and Volume Keys 2) fastboot commands via Computer

#1 Using Hardware Keys

Follow the given steps to boot into Huawei Y7 Pro (2019) Bootloader by hardware buttons

  • First, Power off your second generation Pixel phone.
  • Then Press & hold Power + Volume down button for a few seconds.
    └ This will boot your phone into bootloader mode.
  • Use the Volume Up & Down buttons to navigate between options and Power button to select an option in bootloader mode.

#2 Using PC fastboot Commands

If you want to boot Huawei Y7 Pro (2019) into bootloader mode from your PC, then follow the linked guide below

Note: Make sure you have installed your device USB drivers on your PC and You have install ADB and Fastboot Drivers On PC

About the author

RMG Staff

Rootmygalaxy a.k.a RMG is one of the biggest Android Guide websites which has been serving for last 4 years. The site gets avg. 1.5 million views per month These Posts are done by RMG Team Members.

LineageOS 15.1 (Android 8.1 Oreo) Is now available for many devicesDownload Now
+

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close