How to fix Nintendo Switch Error Code 2110-2003?

Error Code 2110-2003 is a network error on Nintendo Switch that occurs when you make some changes to the console network settings or when the Nintendo Switch isn’t able to establish a connection to a new network. If it’s your first time connecting to a Wi-Fi network and you are getting the error code 2110-2003, it could be due to an incorrect setting in the network or there might be something that prevents the console from obtaining the IP address. If you’ve been getting the Nintendo Switch Error Code 2110-2003, then this guide will be of great help to you. In this guide, you’ll get to know different methods to fix Nintendo Switch Error Code 2110-2003.

How to fix Nintendo Switch Error Code 2110-2003

Method 1: Reboot your Nintendo Switch

• Press and hold the Power button on your Nintendo Switch for a few seconds
• Once the Power Menu appears, choose Power Options
• After that, select Restart

If your Nintendo Switch has become unresponsive, frozen, or isn’t responding to any presses, you can alternatively force it to reboot by pressing and holding the power button for 10-12 seconds instead of 3. Doing that will force the system to turn off and restart.

Method 2: Troubleshoot your modem/router

Power cycle your router

Similar to refreshing your Nintendo Switch, the same thing can be easily performed on your wireless router. For rebooting your router, you should turn it off and then unplug it from the power source for 30 seconds or so. After that, plug it back in and then check for the issue again.

Also Read: How to fix Nintendo Wi-Fi Error 003-1099 Coming While Trying to Connect

Restart your router

Another way of troubleshooting this issue would be by resetting the router. Unlike a power cycle, it’ll return all the firmware settings of the router to its original/factory state. This would be effective if the cause of the issue was a firmware issue on your wireless router. Before you think of resetting the wireless router, it is recommended that you should perform a firmware update. If this doesn’t fix the issue, then you should go ahead with the reset.

Method 3: Check for any wireless signal interference

If the Wi-Fi signal on your Nintendo Switch continues to drop, disconnect, or stop working, it could be due to signal interference. If you have to troubleshoot your Nintendo Switch Wi-Fi, make sure that you do so at this point.

Also Read: How to cancel Nintendo Online Membership?

Method 4: Set up an entirely new internet connection

• Head over to the Nintendo Switch Home Menu
• Select Settings before selecting Internet
• Choose Internet Settings and then wait for the Nintendo Switch to look for nearby Wi-Fi signals
• Select your Wi-Fi network before entering the correct Wi-Fi network password
• Wait for your Internet Connection test result after the setup before selecting OK to complete the setup process

That’s all there is to fix Nintendo Switch error code 2110-2003. Please use the comment section below to ask any questions you might have regarding this guide.