How to Safely Root the Samsung Galaxy Ace 4

Full step by step guide On How to Safely Root the Samsung Galaxy Ace 4 In 2min

Samsung Galaxy Ace 4 is a budget device fro Samsung.It is packed with some decent specs for its price.If you have Galaxy Ace 4 and you want to root it then you are in the right place.This article will guide you on How to Safely Root the Samsung Galaxy Ace 4.

It is a very simple and easy process.Here we will be using Odin Flash tool on windows PC to get root access On Galaxy Ace 4.Make sure that you haver proper drivers installed on your windows PC

How to Safely Root the Samsung Galaxy Ace 4

Related:Root Galaxy Core Prime SM-G360T1(MetroPCS) & Install TWRP

Important:

This guide is only for Samsung Galaxy Ace 4 

*Make sure there is at least 80% battery left on your smartphone before rooting.

Warning:

rootmygalaxy.net will not be held responsible for any kind of damage occurred to your  Samsung Galaxy Ace 4 while following this tutorial.Do it at your own risk.

How to Safely Root the Samsung Galaxy Ace 4

Pre-Requirements:

1.INSTALL SAMSUNG GALAXY DRIVERS

First you need to Setup ADB and Fastboot Drivers on windows PC. This will help you to sendbasic linux commands, and a variety Android specific commands from PC to connected Android devices.

2.SETUP ADB & FASTBOOT DRIVERS ON PC

Now you need to install the USB drivers to connect your device with the computer to follow this guide. Without these USB drivers you can’t connect your device to the PC, first download and install these drivers on your system.

3.DOWNLOAD ANDROID USB DRIVERS

4. ENABLE USB DEBUGGING MODE

Now you need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root, Custom ROM or Unlock process.(Setting->About Phone->Build Number->Tap 7 times on  build number->It will enable the developer mode in the main setting->Go to Developer->Enable the Debugging)

Downloads:

Download Odin 3.10 for free (latest Version)

Samsung Galaxy Ace SM-G357FZ Root Files – Click Here

How to Install TWRP Recovery on Samsung Galaxy J1 Ace

Step By Step Guide

• Extract the downloaded Root file and you will get a two file Step 1 and Step 2.
• Extract Odin and run it as Administrator.
• Make sure that Re-Partition is Unchecked in Odin.
• Select the previously extracted Step1.md5 file in PDA / AP area depending on Odin version you are using.
  
• Turn off phone and press home + volume down + power key together to put phone in download mode.
• Press Volume Up key to confirm booting to Download Mode.
• Connect phone to PC and it should be listed as COMX with bluefield.
• Now press start to begin flashing.
• If Odin doesn’t detect your phone try connecting phone again in different port or using original cable.
• After Step 1 file is flashed reboot again in download mode by pressing home + volume down + power key.
• Select Step2.tar file in PDA / AP field and start flashing.
• After successfully flashing phone unplug the phone and press the power key for 2 seconds to reboot phone.

DONE!!!! Your Samsung Galaxy Ace 4 is now rooted. Enjoy

To verify root access by installing the Root Check from   Play Store.