In this guide, you will learn How To Safely Unroot / Unbrick Redmi 2 (Bootloop Fix) and Back to stock ROM / Firmware
Xiaomi Redmi 2 is one of the most famous budget android phone right now.If you have a rooted Xiaomi and now you want to unroot it or want to fix a bricked Remi 2 or want to fix the bootloop then you are in the right place.Safest way to Unroot / Unbrick Xiaomi Redmi 2 (Bootloop Fix)
This simple step by step article will guide you on How To Restore Back Redmi 2 To Stock Firmware / ROM.This guide is only for Xiaomi Redmi 2 android smartphone. Don’t try this method on any of other Android devices.
CyanogenMod 13 a.k.a CM 13 (Unofficial) is available for Redmi 2 Android 6.0 Marshmallow (Guide linked below)
→ Download & Install CM 13 ROM On Xiaomi Redmi 2 Android Marshmallow 6.0
How To Unroot / Unbrick Redmi 2 (Bootloop Fix)
Important Read:
*Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
How To Unroot / Unbrick Redmi 2 (Bootloop Fix) In 2min
Related Post:How to Unroot Xiaomi Redmi 1S
Warning:
rootmygalaxy.net will not be held responsible for any kind of damage occurred to your Xiaomi Redmi 2while following this tutorial.Do it at your own risk.
Remember:
ENABLE USB DEBUGGING MODE
Now you need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root, Custom ROM or Unlock process.(Setting->About Phone->Build Number->Tap 7 times on build number->It will enable the developer mode in the main setting->Go to Developer->Enable the Debugging)
Downloads and Instructions
Download Mitool Flashing and install on your PC Windows
Download ROM Fastboot Redmi 2 and extract the fastboot ROM to a folder on your D drive
How To Unroot / Unbrick Redmi 2 (Bootloop Fix)
- Open MIflash Tool, click on browse button.
- Select Advanced.
- Browse and select like this:
Fastboot Script – flash_all.bat
NvBoot Script – leave this option
Flash programmer – MPRG8916.mbn
Boot Image – 8916_msimage.mbn
RAW XML File – rawprogram0.xml
Patch XML File – patch0.xml
- And Click OK
- And then connect your phone to PC by plugging in the USB cable and then press POWER and VOLUME DOWN button at the same time.
- Wait for the software to identify your phone. Press refresh On Mi flash if you phone not detect
- Press FLASH Button
- The phone is now being flashed and after operation completed
- Remove battery and connect it again
- Press Power Button
DONE!!! Your phone is now unbricked.Enjoy
Source >> Here