In this guide, you will learn How to manually download & Flash / Install Android 6.0.1 MMB29K On Nexus 7 2013 Marshmallow Official FirmWare OTA Update.This Update is available For Both LTE and WiFi Model.This is the First Android 6.0.1 Marshmallow OTA Update For Google Nexus 7 2013 Codename razor and razorg made by Asus
This Marshmallow Update is available Via OTA.If your Nexus 7 is not rooted or its bootloader is locked then you will get the update notification.To update Via OTA, Go To Settings–>>About Phone–>>System Update.But if your Nexus 7 2013 is rooted or its bootloader is locked, then you have to manually Flash / Install Android 6.0.1 MMB29K On Nexus 7 2013 Marshmallow Official Factory Image.Don’t worry we will be providing Full step by step guide with direct download links to Install Android 6.0.1 MMB29K On Nexus 7 2013
This is not a Major Update.The Update is more focused on Security issues and stability.The OTA update isn’t big.It is around 75 MB.Below we are sharing direct download link with step by step installation guide
→ Full Step By Step Guide to Flash / Install Android 6.0.1 MMB29K On Nexus 7 2013 Marshmallow Official FirmWare
rootmygalaxy.net will not be held responsible for any kind of damage occurred to your Nexus 7 2013 while following this tutorial.Do it at your own risk.
*Make sure there is at least 80% battery left on your smartphone before begin started this process
->Install USB Driver for Nexus On your PC->Usb Drivers
->This guide is only For Nexus 7 2013 with an Unlocked bootloader.So don’t try on other devices
->Make sure you’ve ADB driver installed and properly working, it’s very important to have this. Click here for help.
Safely Flash / Install Android 6.0.1 MMB29K On Nexus 7 2013 Marshmallow Official FirmWare
- [Steps] Install Android 6.0.1 MMB29K On Nexus 9 Marshmallow Official FirmWare
- [Steps] Install Android 6.0.1 MMB29K On Nexus 5X Marshmallow Official FirmWare
- [Steps] Install Android 6.0.1 MMB29M On Nexus 6P Marshmallow
MMB29K (6.0.1) for Nexus 7 WiFi-> Download | File: razor-mmb29k-factory-a39e7047.tgz
MMB29K (6.0.1) for Nexus 7 LTE-> Download | File: razorg-mmb29k-factory-44d21f0a.tgz
(download the right factory image / firmware, according to your device) e.g LTE or WiFi
Manually Flash / Install Android 6.0.1 MMB29K On Nexus 7 2013 Marshmallow Official FirmWare
Step By Step Guide
*First of all, Read the Important Section above
Step 1. Download Android 6.0.1 Factory Image on the desktop of your PC for Nexus 7 from the above link
Step 2. Unlock bootloader of your Nexus device, if you haven’t done this already. Help is here. (same on every nexus)
Step 3 Now Connect your Nexus with PC using its USB cable.
Step 4. Next, Extract the factory image file you downloaded In Step-1, using a free software like 7-zip on your PC. You should get flash-all.bat file. If not, then extract again.
Step 5.After that, Disconnect your Nexus device from PC if it’s connected.
Step 6. Boot your Nexus device into bootloader/fastboot mode:
- Power off the device.
- Press and hold both Volume Down and Power button together until you see anything on the screen. Fastboot should be written at top.
Step 7. Connect your Nexus device to PC now using USB cable.
Step 8. Double click the flash-all.bat file on Windows — it’s in the folder where you extracted all contents of the downloaded file.
- If you’re in Linux or Mac, use this command in terminal: sh ./flash-all.sh
DONE!!!. Once all files installed, your Nexus 7 2013 will have the MMB29K build running.
If you have any queries related to this post feel free to leave that in the comment section below.