Unbrick ZTE Axon 7: Many of the users nowadays like to root, install the custom recovery on their Android device to get more out of the device. However, some of the ROMS, rooting processes are not secure enough. The insecure process may brick your device. Bricked device may be no longer able to boot properly. But luckily most of the bricked devices can be unbricked. So in this article, we will guide you how to unbrick ZTE Axon 7 by Flashing Official Firmware in EDL Mode.
When we try to access the root on our device, sometimes we may end up having bricked device which no longer starts properly or gets stuck in boot screen or boot loop or it won’t turn on completely. This is the very common issue for every Android smartphone, but it can be fixed easily. If you have access to Emergency Download Mode (EDL) and have the right firmware, you can restore your device.
RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide, Proceed at your own risk.
PRE-REQUISITES
- This method is only for ZTE Axon 7 Smartphones.
- Make sure that the USB drivers for your Android device are installed on the PC.
- Maintain 50-60% battery to prevent sudden shutdown between the process.
Downloads
AXON7 Official firmware Version B07
Password: 1bih
Download Latest MiFlash
Steps to Install Unbrick ZTE Axon 7 by Flashing Official Firmware in EDL Mode
- Boot your device in EDL mode
- Download AXON7 Official firmware Version B07 and extract it to new folder.
- Download and Install MiFlash tool from download section above.
- Open the MiFlash Tool
- Connect your device to PC via USB cable.
- Click on browse and direct MiFlash to extracted folder
- Now click Refresh or hit F5 button for 10ec until the progress displays ‘COM#‘ (means your device is now connected)
- In the bottom of MiFlash window select ‘Flash all except storage“. (It doesn’t mean it will save your data, it depends on script)
- Now click on ‘Flash’ to start flashing. This process will take a couple of minutes to complete.
- One flashing is completed, disconnect your device.
- Hold the power button for 10sec to reboot your device.
- Done!!!
Hope this helped you to unbrick your device. If not, then let us know the exact problem in the comment section below.
Hi teja.
i like your post, but i can´t do the unbrick, but i have the axon 7 MINI and cant found official firmware.
do you now where i can get the official firmware for AXON 7 MINI ?
plece, I will be very grateful whit you