Different Ways To fix moisture detected error on Galaxy On8 2018

Here we are sharing some possible ways to fix moisture detected error on Galaxy On8 2018: The Samsung Galaxy On8 2018 smartphone was launched in August 2018. It is a mid-range device from Samsung and comes with some decent specification. The phone comes equipped with a 6.00-inch touchscreen display  (720 pixels by 1480 pixels). It also has a super AMOLED Screen.

The Samsung Galaxy On8 (2018) is powered by octa-core processor which is Qualcomm Snapdragon 450 Primarily Clocked at 1.8 GHz. It is coupled with 4GB Of RAM and 64GB of internal storage that can be expanded up to 256GB via a microSD card. The Samsung Galaxy On8 (2018) sports a dual rear camera setup [16-megapixel (f/1.7) + 5-megapixel (f/1.9)] and a 16-megapixel front camera. The device houses a 3500mAh non-removable battery. It runs Android 8.0 Oreo out of the box.

With the good performance from all departments, Galaxy On8 2018 is a device worth spending on. The device is just a starting point for more improvements which will hit the market this year. But like any other smartphones, minor issues are also reported on Galaxy On8 2018. Although most where minor issues that will be fixed by rolling out an update, a serious and annoying issue of moisture detected error was reported by many users.

The moisture detected error is reported to be coming up when the device is plugged to charge when it is powered off. The feature intended to save the device from water damage is what making this issues from coming up. This is a scary and annoying issue for all users. We have found some easy fixes for this issue, which are listed below. Please read through to find out.

Ways to fix moisture detected error on Galaxy On8 2018

The issue of moisture detected error can also be caused by real moisture dealing with the device. If this is the case your device can end up in serious trouble. So it is advised that you do needed steps to remove moisture before trying other steps to fix it. If the moisture is not the case there are other few fixes too. Read through to find out all the steps to fix the issues.

• Steps to remove moisture

You can get rid of moisture by gently cleaning the charge port and by using a blow dryer on low heat.

• Switch on the device

As the issue is reported to occur while the device is not powered on in most case, it is recommended that you try charging after switching on the device.

• Clear data of USB settings

Some corruption on the saved data of USB settings can also cause issues like this. If this is the case clearing this data can do help. The steps to do this are:

1. Open settings
2. Tap on apps
3. Select system apps
4. Tap on USB settings
5. Tap on clear data
6. Reboot the device.

Hope you are clear with the guide. If you have any queries or feedback leave a comment below.