This guide will help you to Enable Developer Option and USB Debugging On Galaxy S10e. As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.
Samsung Galaxy S10e was launched with Galaxy S10 and S10 Plus. It is the most budget-friendly Samsung Flagship present in the market. The Samsung Galaxy S10e comes equipped with a 5.8 inches Super AMOLED display (FHD+ resolution). Now It has a punch hole display instead of a notch. The global variant is powered by Samsung‘s own Exynos 9820 (8 nm) octa-core (2.73 GHz, Dual-core, M4 Mongoose + 2.31 GHz, Dual core, Cortex A75 + 1.95 GHz, Quad core, Cortex A55) CPU whereas the US and Chinese variants are powered by Qualcomm SDM855 Snapdragon 855 (7 nm). It also has 128/256 GB internal storage coupled with 6 GB of RAM.
The Samsung Galaxy S10e sports a 12 MP + 16 MP Dual Primary Cameras camera setup on the rear and a 16 MP front camera. It now has a Fingerprint scanner which is placed under the display. It comes with Android 9.0 Pie. It houses a Non-removable Li-Ion 3100 mAh battery.
In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Galaxy S10e by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.
Steps To Enable Developer Option and USB Debugging On Galaxy S10e
- First, open Settings on your Galaxy S10e
- Now scroll down to About Phone and Click there
- Tap on software info
- Scroll down to Build number and tap 5-7 times to enable developer option
Note: the above images are from Samsung’s previous Experience UI now Samsung devices come with One UI, still the process is the same.
2.Enable USB debugging on Galaxy S10e
- Once you enabled the Developer Options. Returned back to Settings > Developer Options > USB Debugging. Just Enable that option.
- Done!! USB Debugging on Galaxy S10e is now enabled.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.