This guide will help you to Enable Developer Option and USB Debugging On Galaxy A6 2018. As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.
In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Galaxy A6 2018 by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.
Samsung has again started focusing on its entry and mid-range devices and it can be seen with the newer devices like Galaxy A series and On Series. The Samsung Galaxy A6 comes equipped with a 5.60-inch touchscreen display with a resolution of 720 pixels by 1480 pixels. The Samsung Galaxy A6 is powered by 1.6GHz octa-core processor coupled with 3GB of RAM. The phone has 32GB of internal storage (Expandable up to 256GB via a microSD card).
The device sports a 16-megapixel rear and a 16-megapixel front camera. The Samsung Galaxy A6 runs Android 8.0 Oreo out of the box which will be updated to Android P (9.0) later. The Samsung Galaxy A6 houses a 3000mAh non-removable battery. It has all the connectivity options like Wifi, Bluetooth and Voice over LTE or voLTE.
Steps To Enable Developer Option and USB Debugging On Galaxy A6 2018
- First, open Settings on your Galaxy A6 2018
- Now scroll down to About Phone and Click there
- Tap on software info
- Scroll down to Build number and tap 5-7 times to enable developer option
2.Enable USB debugging on Galaxy A6 2018
- Once you enabled the Developer Options. Returned back to Settings > Developer Options > USB Debugging. Just Enable that option.
- Done!! USB Debugging on Galaxy A6 2018 is now enabled.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.