This guide will help you to Enable Developer Option and USB Debugging On Galaxy On8 2018. As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.
In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Galaxy On8 2018 by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.
The Samsung Galaxy On8 2018 smartphone was launched in August 2018. It is a mid-range device from Samsung and comes with some decent specification. The phone comes equipped with a 6.00-inch touchscreen display (720 pixels by 1480 pixels). It also has a super AMOLED Screen.
The Samsung Galaxy On8 (2018) is powered by octa-core processor which is Qualcomm Snapdragon 450 Primarily Clocked at 1.8 GHz. It is coupled with 4GB Of RAM and 64GB of internal storage that can be expanded up to 256GB via a microSD card. The Samsung Galaxy On8 (2018) sports a dual rear camera setup [16-megapixel (f/1.7) + 5-megapixel (f/1.9)] and a 16-megapixel front camera. The device houses a 3500mAh non-removable battery. It runs Android 8.0 Oreo out of the box.
Steps To Enable Developer Option and USB Debugging On Galaxy On8 2018
- First, open Settings on your Galaxy On8 2018
- Now scroll down to About Phone and Click there
- Tap on software info
- Scroll down to Build number and tap 5-7 times to enable developer option
2.Enable USB debugging on Galaxy On8 2018
- Once you enabled the Developer Options. Returned back to Settings > Developer Options > USB Debugging. Just Enable that option.
- Done!! USB Debugging on Galaxy On8 2018 is now enabled.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.