This guide will help you to Enable Developer Option and USB Debugging On Huawei Honor 10. As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.
In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Huawei Honor 10 by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.
Honor 10, a smaller version of Huawei P20 was released in May 2018. The Honor 10 brings many features from its bigger brother Huwaei P20. The Honor10 comes equipped with a 5.84 inches display with a notch on the top. The display has an 18:9 screen ratio. The display has a resolution of 1080 x 2280. It is protected by Corning Gorilla Glass. The device is powered by 2.4 GHz HiSilicon Kirin 970 SoC Octa-core (4×2.4 GHz Cortex-A73 & 4×1.8 GHz Cortex-A53) processor coupled with 6/4 GB of RAM. It comes with 64/128 GB internal storage option.
The all-new Honor 10 sports Dual 16-megapixels rare camera with Leica optics sensor and a 24-megapixel front camera for a selfie. The device runs on the Android 8.1 Oreo out of the box with Huwaei’s EMUI 8 custom skin at the top. It houses a Non-removable Li-Po 3400 mAh battery. Honor10 includes a Fingerprint, accelerometer, gyro, proximity, compass. The Fingerprint scanner is front-mounted.
Steps To Enable Developer Option and USB Debugging On Huawei Honor 10
- First, open Settings on your Huawei Honor 10
- Now scroll down to System and Click there
- Tap on About Phone
- Scroll down to Build number and tap 5-7 times to enable developer option
2.Enable USB debugging on Huawei Honor 10
- Once you enabled the Developer Options. Returned back to Settings > Developer Options > USB Debugging. Just Enable that option.
- Done!! USB Debugging on Huawei Honor 10 is now enabled.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.