Here we are sharing some possible ways to fix moisture detected error on Galaxy A9s: The Samsung Galaxy A9s was recently launched by Samsung (October 2018). Currently, it is only available in China and we don’t have any information about the device’s release on other markets. It comes equipped with a large 6.30-inch touchscreen display with 1080 pixels by 2220 pixels screen resolution. The Samsung Galaxy A9s runs Android 8.1 Oreo and the device will be getting Android 9.0 Pie in coming months. The device has very similar specifications to the Galaxy A9 2018.
The Device is powered by an octa-core (4×2.2GHz + 4×1.8GHz) processor coupled with 6GB of RAM and 128GB of internal storage that can be expanded up to 512GB via a microSD card. The Samsung Galaxy A9s sports a 4 camera setup on the back side 24-megapixel (f/1.7) + 5-megapixel (f/2.2) + 10-megapixel (f/2.4) + 8-megapixel (f/2.4) and a 24-megapixel front shooter for selfies. The Samsung Galaxy A9s becomes the first Android device to come with a Quad Camera setup on the rear side. The Samsung Galaxy A9s houses a 3800mAh. The device comes with a fingerprint scanner and a dedicated Bixby button.
With the good performance from all departments, Galaxy A9s is a device worth spending on. The device is just a starting point for more improvements which will hit the market this year. But like any other smartphones, minor issues are also reported on Galaxy A9s. Although most where minor issues that will be fixed by rolling out an update, a serious and annoying issue of moisture detected error was reported by many users.
The moisture detected error is reported to be coming up when the device is plugged to charge when it is powered off. The feature intended to save the device from water damage is what making this issues from coming up. This is a scary and annoying issue for all users. We have found some easy fixes for this issue, which are listed below. Please read through to find out.
Table of Contents
Ways to fix moisture detected error on Galaxy A9s
The issue of moisture detected error can also be caused by real moisture dealing with the device. If this is the case your device can end up in serious trouble. So it is advised that you do need steps to remove moisture before trying other steps to fix it. If the moisture is not the case there are other few fixes too. Read through to find out all the steps to fix the issues.
-
Steps to remove moisture
You can get rid of moisture by gently cleaning the charge port and by using a blow dryer on low heat.
-
Switch on the device
As the issue is reported to occur while the device is not powered on in most case, it is recommended that you try charging after switching on the device.
-
Clear data of USB settings
Some corruption on the saved data of USB settings can also cause issues like this. If this is the case clearing this data can do help. The steps to do this are:
- Open settings
- Tap on apps
- Select system apps
- Tap on USB settings
- Tap on clear data
- Reboot the device.
Hope you are clear with the guide. If you have any queries or feedback leave a comment below.
