This guide will help you to Enable Developer Option and USB Debugging On Cubot R15. In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Cubot R15 by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.
As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.
The Cubot R15 is a mid-range device from the company released in Feb 2019. The device comes equipped with 6.26 inches with IPS technology and the resolution is 1080 x 2240 pixels. The smartphone is powered by MediaTek MT6580P Processor coupled with 2 GB RAM and 16 GB of internal storage with support up to 256GB via microSD. The Cubot R15 runs on Android 9.0 Pie out of the box.
The device sports an 8 MP rear dual camera setup on the back side with Dual-LED and AF. There is a 5 megapixels camera on the front. The device houses a 3000 mAh, Li-Polymer Non-Removable battery.
Steps To Enable Developer Option and USB Debugging On Cubot R15
Note: The process is the same for all most all the android devices. The images shared below are from our old post, but this will work on all stock android devices.
1.Developer Option
- First, open Settings on your Cubot R15
- Now scroll down to About Phone and tap on it
- Scroll down to Build Number and tap 5-7 times to enable developer option
2.Enable USB debugging on Cubot R15
- Once you enabled the Developer Options. Returned back to Settings > Additional Settings >Developer Options > USB Debugging. Just Enable that option.
- Done!! USB Debugging on Cubot R15 is now enabled.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.
