This guide will help you to Enable Developer Option and USB Debugging On Huawei Mate 20. As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.
In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Huawei Mate 20 by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.
The Huawei Mate 20 was recently launched by Huawei (October 2018). It was launched with the Pro variant of the device. The Huawei Mate 20 comes equipped with a large 6.53 inches IPS LCD display (1080 x 2244 pixels). This is the first smartphone to be powered by a 7nm chip. The smartphone is powered by an Octa-core HiSilicon Kirin 980 (7 nm) processor coupled with 4/6GB of RAM and 128GB internal memory which is expandable up to 256GB via microSD card.
Huawei Mate 20 runs on Android 9.0 Pie with EMUI 9.0 out of the box. It houses a 4000 mAh Non-removable battery. It also has a Fingerprint sensor under the display. The Huawei Mate 20 sports a Triple camera setup on the rear side (40 MP + 20 MP + 8 MP) and 24 MP front shooting camera. The camera can take some awesome HDR shoots.
Steps To Enable Developer Option and USB Debugging On Huawei Mate 20
- First, open Settings on your Huawei Mate 20
- Now scroll down to System and Click there
- Tap on About Phone
- Scroll down to Build number and tap 5-7 times to enable developer option
2.Enable USB debugging on Huawei Mate 20
- Once you enabled the Developer Options. Returned back to Settings > Developer Options > USB Debugging. Just Enable that option.
- Done!! USB Debugging on Huawei Mate 20 is now enabled.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.