TV Remotes are vital components for any device, be it a TV, a step-top box, or a media player. One of the most popular options that many people go for is the Spectrum TV Remote.
Many people prefer using this remote as it can be used for multiple devices. You will be able to use it to control your Spectrum box and your TV. However, what if it starts having issues or stops working?
There might be a number of reasons your Spectrum TV Remote is not working. This is where this guide will come in handy. In this guide, you will get to know how to fix Spectrum TV Remote not working.
How to fix Spectrum TV Remote not working?
Method 1: Change the remote’s batteries
One of the reasons why your Spectrum TV Remote may not be working properly is due to the batteries inside being weak or completely drained. All you should do is slide the back cover out, remove the old batteries, and then replace them with newer ones. Once you have installed fresh batteries, your remote will start working properly.
Method 2: Enable TV Control
- Power up your Spectrum Cable box and then switch on your TV
- Now, press the Menu button on your Spectrum TV Remote
- Once the menu opens, you should navigate to Settings and Support
- Then, press the “OK” button for opening the Settings page
- Now, navigate and select the Support option before selecting Remote Control
- Choose the “Connect Remote to TV” option and select the “Connect to TV” option
- You will get a list of different TV brands, you can select the brand from here or choose the “View All” option for selecting the supported TV brands
- Follow the on-screen instructions for pairing the remote to your TV
- Check if your remote starts functioning properly
Method 3: Switch between the Cable Mode and TV Mode
- Start by pressing and holding the CBL or Cable Button and the OK/Select button for a few seconds before releasing them
- The Cable Button will start glowing
- You should press the Volume Down button and then select the TV option
- The Cable Button’s light flashing will indicate that you’re switching the remote to control another device
- For switching back to controlling the Cable box, you should press the Volume Up button rather than the Volume Down button
With continuous use, buttons that are used the most could weaken or get jammed into the remote body. In that case, all you should do is get a SIM ejector tool or a pin and then gently lift the edges of the button to lift it. After the button has been lifted, you’ll be able to press the button and it should work like the rest of the buttons on your Spectrum TV Remote.
