Motorola Razr 40 Ultra is an impressive device that comes with a wide array of features and specs. Another area where it shines is custom development. To do that, you’ll need to root your device.
With rooting, there’s always the risk of going into a bricked mode. You should unbrick Motorola Razr 40 Ultra if you want to resolve this issue. It may sound complex but it isn’t that complex as long as you know the right steps to carry out.
If you’re unsure how to do that, then this guide will be helpful as it will give you the steps you need to follow. In this guide, you will get to know how to unbrick Motorola Razr 40 Ultra using Fastboot Commands.
How to unbrick Motorola Razr 40 Ultra using Fastboot Commands
Step 1: Install Android SDK
Firstly, you’ll need to install the Android SDK Platform Tools on your PC. It’s the official ADB and Fastboot binary offered by Google. You’ll need to download it and extract it to a convenient location on your PC.
Step 2: Download Moto Razr 40 Ultra firmware
You will have to get hold of the stock firmware for your Moto Razr 40 Ultra from a trusted website. Once you’ve downloaded the file, extract the file to the platform-tools folder.
Step 3: Boot your device to Fastboot mode
In most cases, your boot-looped or soft-bricked Moto Razr 40 Ultra might already be in the Fastboot mode. If you’re stuck in a bootloop, you need to long-press the Power key for turning it off. After that, press and hold the Power + Volume Down keys together for booting your smartphone to Fastboot mode.
If you’re not able to power off your smartphone, allow its battery to drain out. Once it happens, you should connect it to the charger. Once it is about to boot up, use the Power + Volume Up/Down buttons and it’ll boot to Fastboot mode.
Step 4: Unbrick Motorola Razr 40 Ultra using Fastboot commands
To unbrick Motorola Razr 40 Ultra, you will first need to type in a series of commands in the CMD window that opens up in the platform-tools folder. You must execute one command at a time. If you’re getting an error while executing the command, you must skip the command and move to the next one but do not leave the process mid-way.
Here are the commands to give to unbrick Motorola Razr 40 Ultra –
fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash vbmeta.img vbmeta.img fastboot flash vbmeta_system.img vbmeta_system.img fastboot flash radio.img radio.img fastboot flash bluetooth BTFM.bin fastboot flash dsps dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash vendor_boot vendor_boot.img fastboot flash dtbo dtbo.img fastboot flash recovery recovery.img fastboot flash super super.img_sparsechunk.0 fastboot flash super super.img_sparsechunk.1 fastboot flash super super.img_sparsechunk.2 fastboot flash super super.img_sparsechunk.3 fastboot flash super super.img_sparsechunk.4 fastboot flash super super.img_sparsechunk.5 fastboot flash super super.img_sparsechunk.6 fastboot flash super super.img_sparsechunk.7 fastboot flash super super.img_sparsechunk.8 fastboot flash super super.img_sparsechunk.9 fastboot flash super super.img_sparsechunk.10 fastboot flash super super.img_sparsechunk.11 fastboot flash super super.img_sparsechunk.12 fastboot erase apdp fastboot erase apdpb fastboot erase debug_token fastboot erase carrier fastboot erase userdata fastboot erase metadata fastboot erase ddr fastboot oem fb_mode_clear
Lastly, you must type in the following command to boot your smartphone to the OS –
fastboot reboot
Hope this guide is helpful for you.
