Here we are with an in-depth guide to Remove Google Account lock on Prestigio Wize 3437 4G [ByPass FRP]. Follow all the steps mentioned below carefully. This is not a very difficult process and can be achieved within a few minutes. This functionality has been recently added by Google to increase smartphone user data security. Now, you may ask what is FRP lock and why it’s necessary for every Android user? We have shared a brief guide on it.
The Prestigio Wize 3437 4G comes equipped with a large 7-inch IPS display with a screen resolution of 1024 x 600 Pixels. The device is powered by MediaTek MT8735M, 64-bit Processor coupled with 1GB of RAM and16GB internal storage with supports up to 128GB via microSD card.
It runs on Android 7.0 Nougat out of the box. It sports a 2 Mp rear camera. It houses a Non-Removable 2500 mAh Lithium-Polymer battery. This is a tablet so 2 MP rear camera is more than enough.
What is FRP Lock or Google Account Lock?
The Google Account Lock or FRP means the Factory Reset Protection. If you’ve signed in with your Google ID on an Android device and then perform the factory reset for any reason, Google will cross-check the user authentication. It enhances the device as well as user privacy.
The FRP Lock was first introduced with the Android 5.1 Lollipop version but it’s getting more strict with Android Oreo and Pie running devices. Therefore, if you don’t have the old account credentials, you need to bypass it via SP Flash Tool.
In order to start the flashing process, some of the files and drivers will be required for your device. Follow the pre-requirements properly and then proceed.
- A Windows PC/Laptop and a USB Cable to connect your phone with the computer.
- Download and Install the Latest USB Drivers on your PC/Laptop.
- Install the SP Flash Tool on your computer as well.
- Download Prestigio Wize 3437 4G Scatter.txt file.
- Take a full backup of your phone data before going to the next process.
Steps to Install Tools on Windows
- After installing the USB Drivers and SP Flash Tool on your PC, follow the below step.
- Go to c:\Windows\inf location and search for the file “wpdmtp.inf” file on Windows PC. Then right click on it and select INSTALL option.
Remove Google Account lock on Prestigio Wize 3437 4G [ByPass FRP]
- Launch the SP Flash Tool as an Administrator. [Important]
- Now, copy the downloaded scatter.txt file to SP Flash Tool directory
The scatter.txt file comes with stock firmware file, so download the stock firmware file of the device, the unzip that and get the scatter.txt file
- Then select scatter file for your phone from the SP Flash Tool location by choosing the required tab.
- Change the tab from download to format option.
- Select manual format Flash, and confirm a validation box.
- Leave the “EMMC_USER” as it is in the Region Field.
- Write 0x3588000 in the starting Address field.
- Write 0x100000 in the Format Lenght field.
- Next, press the Start button.
- Now, switch off your device and connect to the PC via USB Cable.
- Google Account Removal or FRP ByPassing process will start automatically and you will get a success notification on your computer screen within a few seconds.
- Your Prestigio Wize 3437 4G handset is now free from Google Account Protection. Now, disconnect your device.
- Reboot the phone into Stock Recovery Mode ->
- By pressing and holding the Power+Volume Up button together for a few seconds. Now, release the power button when logo appears. Then the Stock Recovery Menu will open and leave the volume button as well.
- Now, perform a full Wipe Data/Factory Reset and Wipe Cache as well.
- Next, restart the phone to normal mode and wait for the complete boot. Check whether FRP Lock appears or not.
- You’re done. Enjoy!
You’ve successfully bypassed the FRP Lock or Google Account Protection Lock easily from your device. If you’ve any queries or issues with the guide, feel free to ask in the comments below.