How To Stock Roms

Download Asus ZenFone 3 Oreo Firmware Update [WW_15.0410.1712.31]

Download/Install Asus ZenFone 3 Oreo Firmware Update [WW_15.0410.1712.31]: There is good news for Asus ZenFone 3 users. Asus is officially rolling out Oreo firmware update via OTA. Here, we are providing a direct link to download Asus ZenFone 3 Oreo firmware update having version number WW_15.0410.1712.31. The update will bring Android Oreo as well as the latest security patch for the device.

The OTA is already available for many users and there are many who are still to get it as Asus is releasing it in different phases. If you cannot wait for it to arrive on your smartphone as an OTA, you can download the firmware and update it manually.

Disclaimer

We at rootmygalaxy.net will not be responsible for any damage that might occur to your device in case something goes wrong. So, proceed at your own risk.Make sure you are following the guide properly.

Pre-Requirements

  1. First, go to Settings>About>System Update> Check for Update. Check if the OTA is available or not. If available take the update. Else, follow the following steps.
  2. This method is applicable only for Asus ZenFone 3 (ZE520KL) For WW SKU.
  3. Take a full backup of data because everything will be erased in the process.
  4. Make sure that the battery has at least 60% charge to prevent accidental shut down.
  5. Make sure there is at least 2GB of free space available on your device.

Downloads

  • Download Asus Zenfone 3 15.0410.1712.31 Full Firmware

How to Install Asus ZenFone 3 Oreo Firmware Update [WW_15.0410.1712.31]

Asus ZenFone 3 Oreo Firmware Update [WW_15.0410.1712.31]

  • Method 1

Step 1. Download the files from the download section and rename it as update.zip and transfer to your SDcard.

Step 2. Turn off your smartphone and boot into recovery mode by pressing Power + Volume Up buttons together.

Step 3. Once in the recovery mode, select the option ‘Apply update from SDcard’.

Step 4. Then browse and select update.zip file that you transferred.

It will take some time and then reboot the phone.

  • Method 2

Step 1. Enable USB Debugging mode from Settings> Developer Options. To enable Developer Options, you have to go to Settings> About Phone and tap on the Build Number 7 times continuously.

Step 2. Download ADB and Fastboot driver for your Windows or Download ADB and Fastboot driver for your Mac and install it.

Step 3. Download the Full firmware and rename it to update.zip and copy it to the ADB folder.

Step 4. Turn off your phone and boot into recovery boot by pressing Power + Volume up buttons simultaneously.

Step 5. Choose the option “Apply update from ADB’ and connect your device to your computer.

Step 6. Go inside ADB folder on your computer, press shift and right-click to open the command prompt. Type the following command –

adb devices

This should list your device and ensure it is connected.

Step 7. Type the following to flash the OREO firmware –

adb sideload update.zip

Wait for the process to complete and then disconnect and reboot your device.

 

About the author

RMG Staff

Rootmygalaxy a.k.a RMG is one of the biggest Android Guide websites which has been serving for last 4 years. The site gets avg. 1.5 million views per month These Posts are done by RMG Team Members.

LineageOS 15.1 (Android 8.1 Oreo) Is now available for many devicesDownload Now
+

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close