Download mode which is also known as Odin mode, is one of the important features that enables users to flash custom recovery files, ROMs, or firmware updates on their Samsung Galaxy S24, S24 Plus, and S24 Ultra handsets. In this mode, a USB cable is used to connect the device to a computer, which allows firmware updates to be applied with the help of the software Odin.
This guide provides all the necessary steps for how to boot the Samsung Galaxy S24 series into Download Mode through different methods catering to both new and experienced users.
What is download mode?
Head over to the Samsung support page. You’ll find some cool stuff about Download Mode. Here’s the deal: if your Samsung gadget shows “Downloading…Do not turn off target,” it’s in Download Mode. The Samsung pros use this for fixing and checking things out. But, hey, watch out! Using this mode to put in stuff that’s not supported can mess up your device. You might even lose your warranty or make it easy for hackers to get in.
Stumbled into Download Mode by mistake? No sweat. Just turn off your device. That warning on the screen? It’s mainly for the tech folks when they’re doing their thing in Download Mode. Wanna get out of Download Mode? Hold down the Volume Down and Power or Side buttons. Keep ’em pressed for like 7 seconds until your device kicks back to life. If it goes back to Download Mode after restarting, check if something’s pushing the buttons. Sometimes, a case that doesn’t fit right can do that.
How to Enter Download Mode on Galaxy S24, S24 Plus and S24 Ultra
Method 1: Using Volume Keys
- Connect one end of the USB cable to the PC while leaving the other end free.
- Switch off your device.
- Press and hold the Volume Up and Volume Down buttons together at the same time.
- While holding the keys, connect your phone to the free end of the cable.
- Release the pressed keys when the warning message appears.
- Press the Volume Up key once, and your device will boot into Download Mode.
Method 2: From Recovery Mode
- Switch off your phone and connect it to the PC using a USB cable.
- Then press and hold the Volume Up and Power keys for approximately 7 seconds.
- Your device will enter recovery mode.
- Use the Volume keys to highlight Reboot to Bootloader, and press the Power key to confirm.
- Your device will reboot into download mode.
Method 3: Via ADB Commands
- Go to Settings -> About Phone -> Software Information.
- Tap on Build Number seven times to enable Developer Options.
- In Developer Options, enable USB debugging.
- Download and extract Android SDK Platform Tools on PC.
- In the address bar, type CMD and hit Enter to launch the Command Prompt.
- Execute the following command to boot the device into Download Mode:
adb reboot bootloader
- If the above command does not work, then execute the following command:
adb reboot download
Understand how to enter download mode while starting the Samsung Galaxy S24, S24 Plus, and S24 Ultra. This is an important skill for users who want to experiment with firmware customisations. This guide provides you with the necessary knowledge to successfully boot into Download Mode, regardless of whether you choose to use the technical ADB Commands approach, the Recovery Mode shortcut, or the simple Volume Keys way.
