This guide will help you to Enable Developer Option and USB Debugging On Xiaomi Redmi 4A. As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS.
In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Xiaomi Redmi 4A by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device.
The Redmi 4a is an entry-level Android smartphone. It comes equipped with a large 5 Inch HD IPS Touchscreen Display 720 x 1280 pixels, 16:9 ratio (~296 ppi density). The device is powered by Quad-core 1.4 GHz Cortex-A53 Qualcomm MSM8917 Snapdragon 425 (28 nm) Processor, having 2GB RAM With 16GB ROM which can be expanded via microSD up to 256 GB.
It comes with Android 6.0.1 Marshmallow firmware at the top of Xiaomi’s MIUI 10. It sports a 13MP PDAF Autofocus Camera With Dual-Tone LED Flash and f/2.2 aperture and a 5MP FF f/2.2 camera. The rear side camera can take 1080p@30fps videos and can capture HDR and panorama. It houses a Non-removable Li-Ion 3120 mAh battery. It has all the connectivities options like Wi-Fi, Bluetooth v4.1, GPS, USB OTG, and more. For the price, it is one of the best devices of its time.
Steps To Enable Developer Option and USB Debugging On Xiaomi Redmi 4A
Note: The process is the same for all most all the android devices. The images shared below are from our OnePlus 6t post, but this will work on all stock android devices.
- First, open Settings on your Xiaomi Redmi 4A
- Now scroll down to About Phone and tap on it
- Scroll down to MIUI Version and tap 5-7 times to enable developer option
2.Enable USB debugging on Xiaomi Redmi 4A
- Once you enabled the Developer Options. Returned back to Settings > Additional Settings >Developer Options > USB Debugging. Just Enable that option.
- Done!! USB Debugging on Xiaomi Redmi 4A is now enabled.
If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below.