Here we are sharing some possible ways to fix moisture detected error on Galaxy A6 2018: Samsung has again started focusing on its entry and mid-range devices and it can be seen with the newer devices like Galaxy A series and On Series. The Samsung Galaxy A6 comes equipped with a 5.60-inch touchscreen display with a resolution of 720 pixels by 1480 pixels. The Samsung Galaxy A6 is powered by 1.6GHz octa-core processor coupled with 3GB of RAM. The phone has 32GB of internal storage (Expandable up to 256GB via a microSD card).
The device sports a 16-megapixel rear and a 16-megapixel front camera. The Samsung Galaxy A6 runs Android 8.0 Oreo out of the box which will be updated to Android P (9.0) later. The Samsung Galaxy A6 houses a 3000mAh non-removable battery. It has all the connectivity options like Wifi, Bluetooth and Voice over LTE or voLTE.
With the good performance from all departments, Galaxy A6 2018 is a device worth spending on. The device is just a starting point for more improvements which will hit the market this year. But like any other smartphones, minor issues are also reported on Galaxy A6 2018. Although most where minor issues that will be fixed by rolling out an update, a serious and annoying issue of moisture detected error was reported by many users.
The moisture detected error is reported to be coming up when the device is plugged to charge when it is powered off. The feature intended to save the device from water damage is what making this issues from coming up. This is a scary and annoying issue for all users. We have found some easy fixes for this issue, which are listed below. Please read through to find out.
Ways to fix moisture detected error on Galaxy A6 2018
The issue of moisture detected error can also be caused by real moisture dealing with the device. If this is the case your device can end up in serious trouble. So it is advised that you do need steps to remove moisture before trying other steps to fix it. If the moisture is not the case there are other few fixes too. Read through to find out all the steps to fix the issues.
Steps to remove moisture
You can get rid of moisture by gently cleaning the charge port and by using a blow dryer on low heat.
Switch on the device
As the issue is reported to occur while the device is not powered on in most case, it is recommended that you try charging after switching on the device.
Clear data of USB settings
Some corruption on the saved data of USB settings can also cause issues like this. If this is the case clearing this data can do help. The steps to do this are:
- Open settings
- Tap on apps
- Select system apps
- Tap on USB settings
- Tap on clear data
- Reboot the device.
Hope you are clear with the guide. If you have any queries or feedback leave a comment below.