This simple guide will teach you how to manually Flash / Install Android 6.0 MRA58N on Nexus 6 Marshmallow Official Image.Google has started rolling out new marshmallow update for Nexus 6.This is the 2nd Android 6.0 Marshmallow update for the device.The update comes with built no. MRA58N.
Now there is a new update built no MRA58R is available guide link below
We have already posted:- HOW TO INSTALL Android 6.0 Marshmallow MRA58R UPDATE ON NEXUS 6 WITH FACTORY IMAGE
Users will get this Android 6.0 Marshmallow update in coming days and it will available via OTA.But if you want to flash this update right now then you can easily do that.We will share step by step guide on how to Manually Update Nexus 6 to Official Android 6.0 MRA58N Marshmallow.All you need to unlock the bootloader of your Nexus 6 before going ahead and take proper backup of all your existing data and settings on your phone.Below we provide the download link of the Android 6.0 MRA58N Marshmallow Firmware update Image file.
So If you want to flash this latest Marshmallow firmware image right now then just follow the guide given below on How to Install Android 6.0 MRA58N on Nexus 6 Marshmallow Official Image
Official CyanogenMod 13 (CM13) released For Nexus 6 (Shamu) Link to the guide is below
→Download Official CM13 ROM For Nexus 6 (Shamu)
rootmygalaxy.net will not be held responsible for any kind of damage occurred to your Nexus 6 while following this tutorial.Do it at your own risk.
*Make sure there is at least 80% battery left on your smartphone before begin started this process
->Install USB Driver for Nexus 6 On your PC->Usb Drivers
->Make sure you’ve ADB driver installed and properly working, it’s very important to have this. Click here for help.
Safely Flash / Install Android 6.0 MRA58N on Nexus 6 Marshmallow
Download Android 6.0 Factory Image
Manually Install Android 6.0 MRA58N on Nexus 6 Marshmallow Official Update Image
Step By Step Guide
Flash Android 6.0 MRA58N on Nexus 6 Marshmallow Update
Step 1. First of all, download Android 6.0 Factory Image (shamu-mra58n-factory-bffc99bb.tgz) on the desktop of your PC for Nexus 6 from the above link
Step 2. Unlock bootloader of your Nexus device, if you haven’t done this already. Help is here. (same as Nexus 6P)
Step 3 Connect your Nexus with PC using its USB data cable.
Step 4. Extract the factory image file you downloaded above, using a free software like 7-zip on your PC. You should get flash-all.bat file. If not, then extract again.
Step 5. Disconnect your Nexus device from PC if it’s connected.
Step 6. Boot your Nexus device into bootloader/fastboot mode:
- Power off the device.
- Press and hold both Volume Down and Power button together until you see anything on screen. Fastboot should be written at top.
Step 7. Connect your Nexus device to PC now using USB cable.
Step 8. Double click the flash-all.bat file on Windows — it’s in the folder where you extracted all contents of the downloaded file.
- If you’re in Linux or Mac, use this command in terminal: sh ./flash-all.sh
DONE!!!. Once all files installed, your Nexus device will have the MRA58N build running.