How To Stock Roms

Download and Install Stock Firmware On Moto X4

Download and Install Stock Firmware On Moto X4 (Stock ROM): Android smartphones are always favourite for those Geeks who like to do a lot of experiments with it. With good configurations and features, experimentations will help you get the most out of these smartphones. Moto X4 is such a smartphone with promising configuration. There are already many custom ROMs and TWRP recovery available for this device.

Although experimentation can help you increase the usability of the device, at times you might need to get back into the stock firmware. The reasons can be many from the device going in to boot loop to getting the device bricked due to a wrong step in rooting or custom ROM installation.

The stock ROM for Moto X4 variants from various regions is available for download. In this article, I will provide the download links for the Moto X4 firmware and also the steps to flash it. This can help you solve a lot of issues like:

  1. Bricked device
  2. Device stuck on boot loop
  3. Unrooting device and a lot more

Pre-Requisites

  • Make sure that the USB drivers for your Android device are installed on the PC.
  • Follow the below Guide Exactly or else it may lead to brick your device. RootMyGalaxy.net is not responsible for any damage.
  • Maintain 50-60% battery to prevent sudden shut down between the process.
  • This Update is only for Moto X4 users.
  • Make sure that you have latest ADB and fastboot drivers installed on Windows and Mac/Linux.
  • Latest Moto drivers are installed
  • Take a complete backup of your phone and then proceed.

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Downloads

Steps to install stock firmware on Moto X4

  1. Save the downloaded firmware into the ADB installation directory
  2. Open the ADB folder and click shift+right click and open command here
  3. Connect your device to PC and boot the device into bootloader mode by pressing and holding power button and volume down button
  4. Enter the following commands on to the command window:
    mfastboot flash partition gpt.bin
    mfastboot flash bootloader bootloader.img
    mfastboot reboot-bootloader
    mfastboot flash modem NON-HLOS.bin
    mfastboot flash fsg fsg.mbn
    mfastboot erase modemst1
    mfastboot erase modemst2 
    mfastboot flash bluetooth BTFM.bin
    mfastboot flash dsp dspso.bin
    mfastboot flash logo logo.bin
    mfastboot flash boot boot.img
    mfastboot flash system system.img_sparsechunk.0
    mfastboot flash system system.img_sparsechunk.1
    mfastboot flash system system.img_sparsechunk.2
    mfastboot flash system system.img_sparsechunk.3
    mfastboot flash system system.img_sparsechunk.4
    mfastboot flash system system.img_sparsechunk.5
    mfastboot flash system system.img_sparsechunk.6
    mfastboot flash system system.img_sparsechunk.7
    mfastboot flash system_b system_other.img
    mfastboot flash oem oem.img
    mfastboot erase carrier
    mfastboot erase userdata
    mfastboot erase ddr
    fastboot reboot

Hope you are clear with the installation guide. If you have any queries please leave a comment below.

About the author

Nirvana Seeker

Computer engineer, a passionate writer, and a web designer. Love to hit the road and listen to rock music.

LineageOS 15.1 (Android 8.1 Oreo) Is now available for many devicesDownload Now
+

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close