Basic Guides

How to Enter Into Recovery Mode On Huawei Y7 Pro (2019)

Follow this guide to know How to Enter Into Recovery Mode On Huawei Y7 Pro (2019). The recovery mode is one of the most important features of Android. Like all other Android devices, the new Huawei Y7 Pro (2019) also comes with a stock recovery. The stock recovery has very limited functions. Most of the time stock recovery is used to install the official update via ADB sideload and to factory reset the device.

There is another type of recovery available for Android and it is called Custom recoveries. These recoveries like TWRP recovery or CWM has loads more functionalities.  These Custom recoveries allow users to take nandroid backups (full system backups). Users can install Custom Firmware /ROMs, Kernels and other .zip or .img files via these custom recoveries. One thing you have to remember, you can’t install Custom recoveries unless you unlock the bootloader of the device. Remember, if you install any Custom recovery, it replaces the stock recovery. Users have to follow the same steps to Boot into Stock Recovery or Custom Recovery.

Huawei Y7 Pro (2019) was released in January 2019. It is the first mid-range device from Huawei in 2019. It comes equipped with a 6.2 inches display with a water drop notch on the top. The display has a 19:9 screen ratio. The display has a resolution of 720 x 1520 Pixels (~269 ppi density). The screen protection is unknown. The device is powered by Qualcomm SDM450 Snapdragon 450 (14 nm) which is an Octa-core 1.8 GHz Cortex-A53 processor coupled with Adreno 506 GPU. It is coupled with 3 GB of RAM. It comes with 32 GB internal storage option which can be expanded up to 512 GB via microSD.

The all-new Huawei Y7 Pro (2019) sports Dual rare camera setup, the primary camera is 13 MP, f/1.8, PDAF and the secondary is 2 MP, f/2.4, depth sensor. It has a 16-megapixel front camera for a selfie. The device runs on the Android 8.1 Oreo out of the box with Huwaei’s  EMUI 8.2 custom skin at the top. It houses a Non-removable Li-Po 4000mAh battery. Honor10 includes a Fingerprint, accelerometer, gyro, proximity, compass. The Fingerprint scanner on the rear side under the camera section.

Steps To Enter Into Recovery Mode On Huawei Y7 Pro (2019)

  • Turn off your smartphone completely.
  • Now Press and hold Volume UP button along with Power button simultaneously for a few secs
  • Your Huawei Y7 Pro (2019) will enter the stock recovery.

Note: Use Vol Up and Down button to navigate the menu and Power button to select.

About the author

RMG Staff

Rootmygalaxy a.k.a RMG is one of the biggest Android Guide websites which has been serving for last 4 years. The site gets avg. 1.5 million views per month These Posts are done by RMG Team Members.

LineageOS 15.1 (Android 8.1 Oreo) Is now available for many devicesDownload Now
+