How To Rooting Guide

How To Root OneClick Prince P9 With Magisk (No TWRP Required) ?

Here in this guide, we will be sharing a detailed step by step guide to Root OneClick Prince P9 With Magisk manager. Thanks to the Magisk manager and stock firmware of the device we now can Root OneClick Prince P9. This method doesn’t require TWRP recovery or any other Custom Recovery.

Manufacturers allow users to unlock the bootloader of their devices and thanks to that rooting becomes a reality. Like all other Android devices, OneClick Prince P9 comes with an unlockable bootloader which means root can be gained on the smartphone after unlocking the bootloader

Disclaimer

RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach

Important Note: Without TWRP, you can’t flash the root files like Magisk. Now we have to manually modify the stock boot image by patch to get root access on the device

How To Root OneClick Prince P9 With Magisk Manager

Root OneClick Prince P9 With Magisk (No TWRP Required)

#1 Unlock the bootloader

 For more information about Android rooting, check out our detailed post here > What Is Rooting Android Phone? Advantages And Disadvantages

#2 Download stock boot image

Download the boot file according to your device. Once downloaded, unzip the file and open it, look for a .zip file. Open that file too, now you will see a file named boot.img (This is the official stock image or firmware)

#3 Patch boot image

  • Move the boot.img to your device’s internal storage.
  • Download & install the latest Magisk Manager on your device
  • Open magisk manager, On the main screen, select Install > Install > Patch Boot Image File
  • Now select the boot image (boot.img). Magisk will start to patch the boot image.
  • After completion, the file will be saved as “magisk_patched.img” in your Downloads folder

#4 Finally, Root OneClick Prince P9

Note: If you have MediaTek powered device you can follow this guide to flash the patched boot.img > How to Install MediaTek Stock ROMs With SP Flash Tool (MTK Android Smartphones)

  • Connect your device to PC and transfer the “magisk_patched.img” file from your phone’s download section to the platform-tools folder on your PC

Download and Install Latest ADB and Fastboot SDK Platform-Tools (2019)

  • Now issue the following command to boot your device to bootloader mode (Make sure your device is connected to the PC)
adb reboot bootoader
  • Now issue the command given below to Flash the patched boot image
fastboot flash boot magisk_patched.img
  • For devices with A/B partition system, use the below commands:
fastboot flash boot_a patched_boot.img

fastboot flash boot_b patched_boot.img

Done !!! Just reboot your device. Your device should be rooted now.

About the author

RMG Staff

RMG Staff is a blogger who loves to write tech-related new, a full-time tech enthusiast. He also loves to write reviews and How-to articles based on Android.

LineageOS 16 (Android 9.0 Pie) Is now available for many devicesDownload Now
+